138 results found
-
Enter manual patron notifications (esp calls) into the Notifications History
Calls to a patron to notify them of books on hold can't be added to Polaris.
It would be especially helpful if we could manually add notifications (even if we manually email a patron) and the appropriate reason/time into the notifications history. I've seen a "dated notes" suggestion here but don't feel these are the same.
9 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Auto-populate the Until field with the date in the Dates Closed field when adding a new date to the Dates Closed table
Currently, when staff update their library's Dates Closed table for a single date in the future they are required to select/enter the same date in both the Dates Closed and the Until fields.
While it is just a couple additional clicks, having the Until field auto-populate with the same date that staff have selected/entered in the Date Closed field would improve the end user experience when they are entering a number of single dates at once.
7 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Improved SIP communication for holds
Per the Polaris support team as of September 2023, SIP2 only supports communication about holds where the associated item is in "Held" status. Holds requests in other statuses are 'invisible' to third-party services communicating with Polaris through SIP. When I brought this up, our site manager recommended putting in an enhancement request. Apparently there were some older ones on IdeaLab that have not been carried over to Idea Exchange.
I was skeptical that there would be anything Clarivate could do from within an ILS to make this change since it sounded like a SIP limitation rather than an ILS limitation,…
12 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Password Reset PAPI Call
Currently we have to send patrons from our websites to the PAC if they need to reset their passwords. It would be great if there was an API call for this, as it's disruptive to the patron experience to have to send them to another site.
The suggested functionality would reflect the PAC experience: once they enter a barcode, a password reset email would be sent to the email address on the account.
17 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Improve display in Polaris client for held holds that are cancelled
We are upgrading to 7.4 soon and noticed that one of the new features (from 7.3) was the ability to cancel held holds. These seem to display really nicely in Leap (especially with the holds to action tab), but the display in the Polaris client could be improved. Currently, it seems like these cancelled holds just get added to the cancelled view which does not give any indication that the item was on the hold shelf and needs to be pulled/checked in.
I would like to see either a canned report that lists all held holds that were cancelled at…
11 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Send out account expiration reminders as part of the eContent integration.
There can be accounts that are expired and are still able to check out ebooks. Expired accounts are no longer valid and should be blocking at least in the integration function between the ebook vendor and Polaris.
If this isn't possible, can the checkout action trigger an email notice to the customer to have their library account renewed or reviewed.
This should happen each day an integrated eContent transaction occurs.
Keeping the account up to date will prevent the account from being closed or purged.5 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Ability to digitally save patron registration card to record
We would like to be able to save a scanned copy of a patron registration card to our patron's record. Louisiana is passing a law on content restrictions that requires us to store this information as well as any signed waivers. It would be convenient to be able to scan and save this information directly to a patron's account rather than dump all the saves into a cloud storage platform.
8 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Add a filter to the Power Pac Availability screen to show checked in items.
After selecting a title and clicking on the Availability button, a list of items is shown with their check out status. On that screen it would be great if there was a check box to turn on a filter that would only show the checked in statuses. Currently, the customer sees a very long list of checked out items and may not see the one item that is available to have now.
8 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Driver's License Scanning for Leap
Our Polaris Staff Client has the option to scan a patron's driver's license to autofill their registration information. It would be great for Polaris Leap to also have this feature.
11 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
API reading history sortable by title or last added
We have had multiple patron requests to be able to sort reading history delivered by API by latest added or by title. Currently reading history is displayed with the oldest first which results in a lot of scrolling by the user.
15 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
When Receiving POs, Only Change Item Status to In-Process if Current Item Status Is On Order
It is frustrating that Polaris allows items that have not been received to circulate. There is probably not a connection between the PO status and the item status – but it sure would be nice if there was! We recently had an incident where items were distributed to branches before having been invoiced and received. A few days later when the invoice was processed, the items were all changed to a status of In-Process, even though they had already been checked out or were in a status of Being Held. It was very difficult to correct. One solution would be…
20 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Add Record Status Date to Record Sets
Since record sets have 2-level deletion, like bibs, items, and authorities, the RecordSets table should have a RecordStatusDate column.
When using the 2-level deletion to manage record clean-up, it is usual to purge records that have been deleted for a certain amount of time, but without the deletion date it is harder to determine. Because the modification date of deleted record sets is still updated by some actions taken on the records in the set (e.g. merging over a record), the only way to determine the deletion is by querying the transactions database.
With the record status date added, determining…
12 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Language Editor for Saved Search Results Emails
Patrons set up "saved search results" and can receive email notifications on a regular basis.
Unfortunately the language within those emails are misleading for patrons where the top of the email says "New items of interest at your library" , the middle of the message "The following saved searches returned these new results", but then at the bottom of the email the message says "this search found no new results" (See pictures). When reaching out to customer support reps, they informed us this is hard coded and cannot be changed in sysadmin or language editor.
In a future upgrade, it…
8 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Have the ability to enter quantity when adding a Fee
Our staff would like the ability to add a quantity along with Amount, Item Barcode, Notes when adding a new Fee Reason to a patrons account.
3 votes -
Cache Busting for Theme CSS File
When the theme's scss file is edited and compiled, the version parameter on the stylesheet link in the HTML does not update. This means that browsers don't know to pull the updated css from the server if they have it cached, so the css updates won't apply for all users immediately due to browser caching. Here's an example of the line in the HTML with the version parameter:
<link type="text/css" rel=""https://yourlibrary.org/polaris/custom/themes/theme1/site.css?ver=7.1.14157.0">
It looks like the version parameter is based on the Polaris version, so I'm guessing it's automatically updated whenever Polaris is upgraded, but that doesn't help for theme adjustments…
6 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
More documentation for Polaris Inventory Manager (PIM)
Create step-by-step instructions and documentation for Polaris Inventory Manager; how to install it, set things up, using record sets, etc. There really is nothing available that we can share with our libraries; there is a webinar on inventory, but it does not really discuss install and set-up.
The same documentation for inventory via check-in would also be greatly appreciated.10 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Return additional elements in the PAPI PatronValidate method
We use ChargeBalance, StatisticalClassID and BirthDate with 3rd party vendors to verify if our patrons are eligible to use licensed resources. Currently if I have a 3rd party vendor use PAPI to auth our patrons I would have to have them use PatronBasicDataGet to access this data which also returns personal information I do not want them to have access too. If ChargeBalance, StatisticalClassID and BirthDate were added to PatronValidate then the 3rg party vendors would not have unnecessary access to the full patron record. It may also be beneficial to include the UDF fields, Patron Name and email address…
4 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Bib record conversion from AACR2 to RDA
It would be a real timesaver if Polaris could automatically convert AACR2 records to RDA records upon import. Even if only partial changes could be made, it would be a big help to our catalogers.
24 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Separating "Ready for Pick Up" and "Renewal" text notifications
It would be nice if we could separate the "holds ready for pick up" texts from the "renew" texts and be able to choose if you want one or the other or both. Customers would love to get a text for when their holds come in, but for some, the renewal texts are too much, and the pick up texts get lost in the volume. Then also, have the option to get renewals and/or pick up notices in their email.
7 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
-
Take free days into account when recording check-in date in item history
Hi there! We just had a situation with a patron where several items they returned in the book drop on 6/30 were checked in today 7/5, however they were back-dated to accommodate for the days the library was closed and prevent fees from accruing. But upon viewing the history in Leap for each of those items, the check-in date displays as 7/5 and does NOT show the 5 days back-date, which would've been 6/30. This is very confusing and misleading, as our patron spoke to the owning library about the items and the owning library said 'New Milford checked those…
6 votesIn accordance with the Idea Graduation Workflow guidelines agreed upon by Innovative and IUG, this idea has been closed because it was submitted more than two years ago and has not been selected for inclusion in the product.
This idea is still available for commenting but is no longer eligible for voting.
Ideas that were submitted three or more years ago are archived for future reference.
- Don't see your idea?